Microwave-Assisted Catalytic Pyrolysis of Polyethylene for the Selective Production of Olefins

Technology

Traditionally, plastic pyrolysis has been performed at high temperatures and in the absence of a catalyst. Such thermal pyrolysis processes have two major drawbacks: they are highly energy-intensive due to extremely high temperatures and result in a very broad distribution of products or gasification if temperatures are sufficiently high. Catalytic pyrolysis of plastics has also been studied to a limited extent at moderately high temperatures (400-600 °C). Catalytic pyrolysis typically uses zeolite-based catalysts, which produce light hydrocarbons and aromatics in the gasoline-diesel range that are not of very high value. Furthermore, these processes also cause excessive coking of the catalyst. Many pyrolysis processes use a two-step setup with a separate catalyst bed through which the pyrolysis vapors are passed. The two-step process adds to the cost. Our invention is a microwave (MW) slurry pyrolysis reactor that overcomes challenges of the conventional pyrolysis. A porous silicon carbide monolith is used as the microwave susceptor to facilitate rapid heating of the reaction media. A gas (N2 or H2) or CO2 is bubbled continuously through the polymer-catalyst melt to create a slurry and ensure proper mixing of reaction media. The continuous gas flow helps prevent over-cracking by removing hydrocarbon products continuously along with the carrier gas. The reactor is equipped with an online distillation unit that separates liquid and gaseous reaction products collected in a liquid trap and gas sampling bag, respectively, to avoid over cracking. The MW heating reduces coke formation due to preventing excessive thermal gradients compared to conventional heating. The catalytic MW pyrolysis of LDPE at relatively mild conditions (370 °C) was investigated with different solid-acid catalysts, and the results suggested that tuning the acidity and porosity of the catalyst can shift the product selectivity towards alkanes or olefins. Mesoporous solid acids (P-SiO2, WOx-ZrO2, Al-MCM-41, and Al-SBA-15) produce olefins as the major products (https://doi.org/10.1016/j.cej.2022.140332). Amongst the different catalysts studied, Al-SBA-15 performed best with \~88% selectivity towards olefins. Olefins have a very high market value and can be used in high value products.

Benefits

  • Low temperatures, energy savings, lower CO2 emissions
  • Use of microwaves with MW absorbing scaffolds to enhance heat transfer to the plastics and reduce reaction times
  • Unique products with exciting prospects for recycling and upcycling

Applications

  • Plastic Recycling Companies
  • Petrochemical Companies

Additional info

The technology is patent pending with fully preserved U.S. and worldwide patent rights available for licensing.